Showing posts with label this. Show all posts
Showing posts with label this. Show all posts

Please forgive me for this political agenda on my gardening blog

I hope you will take the time to read this essay Ive written. It describes the systematic failure of our political system.

The Federal Election Campaign Act (FECA) of 1972 required candidates to disclose sources of campaign contributions and campaign expenditures. It also limited spending on media advertisements. But that portion of the law was ruled unconstitutional — and that actually opened the door for the Citizens United decision. This was a step forward for equality and transparency of our elected officials. But the very powerful very rich were still in pursuit of more control and contrived a treacherous plan to deceive us by suing in two important cases.

In 2010 the US Supreme Court ruled on the Citizens United vs Federal Election Commission and gave corporations and unions the right to spend unlimited sums on ads and other political tools. Its important to note that the Citizens United decision was about spending, not about contributions. This did not affect contributions. For that they created what is know as "independent-expenditure only committees" such as Speechnow.org which represent spending by individuals, groups, political committees, corporations or unions expressly advocating the election or defeat of clearly identified federal candidates.

In 2010 the D.C. Circuit Court of Appeals also issued its ruling in the Speechnow.org v. FEC which removed contribution limits as applied to SpeechNow. Previously the courts had ruled that limits set by the Federal Election Campaign Act applied to this group called SpeechNow. It is still illegal for companies and labor unions to give money directly to candidates for federal office, but together with the Supreme Court’s earlier Citizens United decision allowing unlimited corporate expenditures, the SpeechNow ruling was just what the ultra wealth needed to create a government controlled by "Political Action Committees" (Super PAC) where most of the funding comes from just a few rich individuals.

The Supreme Court kept limits on disclosure in place, and super PACs are required to report regularly on who their donors are. The same can’t be said for “social welfare” groups and some other nonprofits, like business leagues leaving another loop hole for the billionaire industrialist Koch brothers to create a nonprofit called the “Association for American Innovation” that will act as a hub for funneling undisclosed spending towards the Kochs’ political projects.

The American Legislative Exchange Council (ALEC) is another "Business League" which allows corporations and wealthy individuals to use congressmen as lobbyist and collaborate on bills, often presenting industry-backed legislation as a grass-roots organization. It brings Republican state legislators and big corporations together to frame right wing legislative agendas in the form of model bills.

In November we will have an opportunity to vote on reversing the 2010 U.S. Supreme Court ruling for Citizens United. Please vote.

As you know I am an advocate of the https://mayday.us/ superPac. Its time we used their trickery and corrupt laws against them and put an end to "Political Action Committees" (superPAC) . Jim Rubens is the only Republican running for Senate that supports Campaign Reform, but there must be others who would like to get back to running the country rather than spending 70% of their resources on being re-elected. If we persist we can make this happen. Please contribute to Mayday.us
Read More..

Immaculate Conception Church in Albuquerque to Offer Church of Second Chances Program this Fall

Photo: JustFaith Ministries
Immaculate Conception Catholic Church in Albuquerque is one of dozens of faith communities around the country that will participate in one of three JustMatters modules that JustFaith Ministries is offering this fall. The modules encourage small groups to explore critical current issues within the context of the Gospels and the life and example of Jesus. "In a world that is too quick to encourage rhetoric that divides us from one another, these experiences cultivate genuine dialogue, contemplative prayer, and community," said JustFaith.

Immaculate Conception will offer an eight-week session around the Church of Second Chances module, which shares the stories of incarcerated people and exposes injustices in the judicial system through the lens of faith. This module hopes to inspire a prophetic revision of incarceration that invites restoration, mercy and reconciliation.

This newly revised eight-session version of JustFaiths Prison Reform module represents greater diversity in the voices of those behind bars, includes updated video resources, encourages deeper dialogue, and incorporates Pope Francis’ message of mercy.

The eight-week session will be held  each Thursday evening at Immaculate Conception, 619 Copper NW (map) in downtown Albuquerque, September 24 through November 12, 2015,  in the Guadalupe Room.  For more information or to register, please call or email Joy Dinaro in the church office.(505) 247 – 4271 ext. 3034  jdinaro@iccabq.org

In addition to the module on prison reform, JustFaith Ministries offers the Crossing Borders program (immigration) and The Sultan and the Saint (Muslim-Christian relationships) this fall (More details here), but no churches in the Albuquerque area are offering these two programs. Other programs on the environment, solidarity and peacemaking are currently available but have not been recently revised and are not supported by JustFaith staff this fall.
Read More..

Moving this sucker

MAN
Titan Atlas, the heavens on his shoulders


I goofed. When I set up my initial system, I wasnt sure what my final design would look like. So I put a full 3x5 unit(fish tank, grow bed) along a clear bit of wall.

I did precisely locate it according to the eventual position of one of the 3x5 growbeds. Alas, the final plan wont have a fish tank in that place. And I cant move the fish tank without disassembling the stand and growbed.

Moving 500 pounds of wet rock, along with 800 pounds of nicely seasoned water is daunting...

Heres my plan:

1) Clear the wall where I want the fish tanks to end up, eventually. [This involves building a double-deep box shelf to house the boxes that currently reside along that wall.]

2) Empty the growbed. Luckily I hadnt planted anything yet. Phew! I have a couple of big sturdy bags that I believe will accommodate the gravel. I can stop pumping water into the growbed for a day or two before this move, to let water drain.

3) Move the growbed onto wood blocks. The wood blocks will protect the plumbing bulkhead, which Ill want to keep in place.

4) Disassemble the 2x4 shelf unit.

5) Pump 50 gallons of the water into the empty growbed. Ill replace the current standpipe with a length of 3/4" tube that extends above the top edge of the growbed.

6) Discard the remaining water. Since I have a couple small fish, theyll get to live in the 50 gallon growbed for the duration.

7) Move the empty fishtank to the new location.

8) Reassemble the 2x4 shelf unit.

9) Anchor the 2x4 shelf unit to the wall.

10) Pump the 50 gallons of water from the growbed back into the relocated fishtank. [Move the fish too.]

11) Position the empty growbed on the 2x4 shelf.

12) Return the gravel to the empty growbed.

Is it mere coincidence that there are 12 steps to this effort?
Read More..

This is my tank heater

UPDATE:
2013/01/18
Several months ago I built this heater with a stainless steel element. Its actually refered to as an Incoloy type water heater element  (120-1500-ELD.

You can purchase them online here at http://www.plumbingsupply.com/elements.html

This heater now floats in the sump tank.  Its very important to add something buoyant at the end opposite the cord so that air bubbles leaving the element do not get caught in the small area where the element screws into the plastic housing.  Even this very small amount of exposure will burn out the element.

 


Previous Designs


 2012/03/19
Today I made the mistake of unplugging my pump while the heater was on.  PVC smoke quickly filled the room and the element died.
.
Here is my new design.  Its made of 1" galvanized pipe, but the element will still self destruct withing seconds if its run dry so I have moved it to a position below the level of the sump tank.  The outlet is above the fish tank so it will not draw a siphon but the water level will drop to the level in the sump tank.
If I should loose the pump the water will boil inside the pipe, but this galvanized pipe will not burn.
The thermostat can not operate at boiling temperature, and will still burn and self destruct within seconds if the water is not flowing.  At least this will prevent heating galvanized pipe. - Just looking for a bright spot to an unpleasant situation...

I will not be using the Honeywell Thermostat because the water changes so slowly that I can regulate it as I wish by flipping the switch on and off.  The temperature changes by about 4F per day.
 
If I ever choose to hook up the thermostat I think I may be able the use the high cut off temp as a safety.
But there has simply been too much to do.

My plan is to use an 1-1/2" PVC elbow to cover the electrical connections.

Original Post:
This is my heater. It uses two 1500W elements in series to drop the current down below 8A which is the max amperage my Honeywell 675 thermostat will handle.  In this picture I am using only one element without the thermostat in order to deliver more heat.
Its an inline flow through heater. It works very well and should last for many years. As long as water flows through the heater it will not over heat.  I would like to add a relay that will only allow the heater to be on when the pump is on and water is flowing.
The elements are rated at 1500W, but measurements indicate only 1300 W are actually being used when only one element is used, and when placed in series 750 W is drawn.  I attribute the difference to line loss even though the building is wired with 12 gauge.
The elements screw into 1" female adapters.  The housing is made of 2" PVC.  When I put my hand on the heater, I can just barely feel the heat, but over time it will maintain my 1000 gallon system which is well insulated.
Read More..