Here are some pictures of how I built this water wise garden.
The hole was dug with a trench for the 4" drain line and a sump pit at the lowest point |
The pond liner placed with 4" perforated drain line. Notice the filter sleeve on the drain line. |
Gravel being spread level |
This black shade cloth is laid on top of the gravel to keep the soil from washing down into the gravel |
The soil has been added. This soil mix contains has enough clay that it will wick the moisture up from below |
A thick layer of mulch will be added when I plant. This garden will save rain water, and maintain moisture below the surface without loss to evaporation. There is no need to water this garden other than occasionally maintaining some water in the reservoir tank. The amount of water used will depend upon the type of crop and the heat, but it will not waste a drop.
After I install the large reservoir water tank the pump will be moved out of the sump to the larger tank. It would have been easier to have done it this way from the beginning, but I did not feel that I was up to digging a hole that size right now, and wanted to get this garden planted. Here is a diagram of how it will eventually work.
This could be duplicated on a much larger scale for commercial farming. Sure its a lot of work and extra expense, but the savings in water should count for something. With a large enough reservoir, and contouring of the land; the need for any extra water could be eliminated by capturing rain water..
This is July 4th. The basil and tomatoes have done well. Its been about 10 weeks since this garden was planted and it has used about 100 gallons of water from the reservoir which provides flowing water under the garden bed 24/7. Its been the easiest of all my gardens because I have not had to water it. The tank pictured below holds 135 gallons. There is a small Model 5 utility pump inside that pumps water to the far end of the rocks buried below the soil.
I plan to build a top for this so that it looks nice. I would not want someone to trip into the hole. I also need to finish running an electric outlet over to the pump.
0 comments:
Post a Comment